| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| Battlefield 3 http://www.wsgf.org/phpBB3/viewtopic.php?f=61&t=26047 |
Page 11 of 12 |
| Author: | Jori [ 07 Nov 2011, 17:54 ] |
| Post subject: | matrices wrote:Jori |
I hope by "Eyefinity" they mean both that and Surround. Yes, they said actually that they are looking for a solution on both systems. ATI and Nvidia. [quote]I've found a better solution for playing at 3 monitors and the player overhead tags active. Instead of playing at windowed mode (wich it works) i've found that is much better to play in full screen but setting the resolution to 3840x720 . In that resolution the player tags are shown correctly. I know, is a bit low resolution, but it works. In the other hand, you can set the video performance to ultra and so and the game will look better than playing on windowed mode and all the settings to low. (at least in my case (GTX 590) ) This solution would be OK if you could actually run 1:1 AR scaling, which you can't do in Surround mode. So in practice this solution is terrible because everything onscreen looks like smeared crap in non-native res. Well, in fact, i'm playing at 4800x900 now, and all the HUD elements and enemy markers are showed ok. The 4800x900 resolution has the same aspect ratio that 5760x1080. And 3840x720 too. So, the game looks quite well at 4800x900. Nothing deformed or messed. In fact, when a patch is released, I will see if I play at 5760x1080 or if it's better to keep playing at 4800x900, because in that lower resolution I can set the graphics to HIGH, while in 5760x1080 I have to drop the graphics quality to MEDIUM to run so smooth as I play with 4800x900. So... at this moment i'm not waiting for any patch. I prefer to play at 4800x900 right now, and the gam looks amazing for me :) |
|
| Author: | Terrace [ 07 Nov 2011, 18:07 ] |
| Post subject: | What FOV would people suggest |
What FOV would people suggest setting the game to with 5760x1080 thats bezel adjusted to 6048x1080 side monitors about a 30 degree angle from the center one, also if someone could link me some information about FOV and how its worked out and should it be the same for all my other games that would be a big bonus, i have zero idea what i'm doing other than its feild of veiw :P |
|
| Author: | IronWarrior [ 07 Nov 2011, 20:53 ] |
| Post subject: | Well I tired all these HUD |
Well I tired all these HUD fixes and nothing works. Going to have to stick with one monitor till they fix this. |
|
| Author: | Terrace [ 07 Nov 2011, 21:01 ] |
| Post subject: | IronWarrior wrote:Well I |
Well I tired all these HUD fixes and nothing works. Going to have to stick with one monitor till they fix this. one of the steps some of the guides to fixing it so far have said is that it doesnt matter which is your preffered display and that you can set it later, but for me i found that if the correct monitor isnt the preffered one when you create some of the groups in display and the eyefinity setup then it doesnt work, even if you set the prefered later to the correct one, i can't explain why but if it doesnt work but it looks like you are following every step then try to finish the guides without needing to set the prefered display even if it means going back to step one for a few attempts while all your monitors are duplicates which is where you should be starting, for instance my monitors when i defaultly make a group are 2-1-3 |
|
| Author: | numanoid [ 08 Nov 2011, 03:12 ] |
| Post subject: | Jori wrote:matrices wrote:I |
[quote]I hope by "Eyefinity" they mean both that and Surround. Yes, they said actually that they are looking for a solution on both systems. ATI and Nvidia. [quote]I've found a better solution for playing at 3 monitors and the player overhead tags active. Instead of playing at windowed mode (wich it works) i've found that is much better to play in full screen but setting the resolution to 3840x720 . In that resolution the player tags are shown correctly. I know, is a bit low resolution, but it works. In the other hand, you can set the video performance to ultra and so and the game will look better than playing on windowed mode and all the settings to low. (at least in my case (GTX 590) ) This solution would be OK if you could actually run 1:1 AR scaling, which you can't do in Surround mode. So in practice this solution is terrible because everything onscreen looks like smeared crap in non-native res. Well, in fact, i'm playing at 4800x900 now, and all the HUD elements and enemy markers are showed ok. The 4800x900 resolution has the same aspect ratio that 5760x1080. And 3840x720 too. So, the game looks quite well at 4800x900. Nothing deformed or messed. In fact, when a patch is released, I will see if I play at 5760x1080 or if it's better to keep playing at 4800x900, because in that lower resolution I can set the graphics to HIGH, while in 5760x1080 I have to drop the graphics quality to MEDIUM to run so smooth as I play with 4800x900. So... at this moment i'm not waiting for any patch. I prefer to play at 4800x900 right now, and the gam looks amazing for me :) I just bought a GTX590 and have 3 monitors on the way. Can you tell me specific settings you were using for the various resolutions? I'm thinking you (and I) are Vram limited. If we turn down AA can we turn up the other settings? I've never done widescreen gaming before and there is a huge learning curve as I am seeing reading these forums. |
|
| Author: | salsoul [ 08 Nov 2011, 12:44 ] |
| Post subject: | numanoid wrote:I've never |
Welcome to the forum ! once you go 3 monitors you will never go back to 1 :triplewide Ive been eyefinity gaming for 7 months or so now. I was just like you unsure about it, this forum is excellent and everyone will help you if they can. The learning curve isnt as steep as it may seem for the rewards far outway the effort. good luck ! :welcome Well I tired all these HUD fixes and nothing works. Going to have to stick with one monitor till they fix this. Hi I managed to get it working using this link Get satisfaction BF3 support forums nvidia_surround_and_eyefinity_issues Still cant get it to work @ 5760x1080 but @ 4800x900 all player markers are lined up. there is however a small cavaet to this. my minimap is now on the left monitor instead of the middle/ left It seems in order to get the player markers lined up with the players the minimap & ammo move to the outside monitors. they still seem to be working on it though. regards sal |
|
| Author: | ChainSOV [ 21 Nov 2011, 11:02 ] |
| Post subject: | I had no problems with enemy |
I had no problems with enemy markers because I have a native resolution of 4320*900, but thanks to this thread I was able to configure my hud to my likings. I actually prefer my minimap on the outer monitor because this way I can run it maximized, so i set GstRender.ScreenSafeAreaWidth to about 0.660000 too bad the minimap minimizes after some time and doesn't remember its setting, so I have to maximize it and set the zoom level after each death again But the stupidly bright lensflares are still a problem on the smaller resolution and are the reason I stay in tanks with nightvision most of the time :-/ |
|
| Author: | BeasturR [ 22 Nov 2011, 12:29 ] |
| Post subject: | As of the patch today. my |
As of the patch today. my steup went from not working at all to working perfectly. Running 2 x 6950 in crossfire, with 3 monitor setup. No issues at all, and excellent percieved framerate. 100% playable. Happy bunny now, jets in particular are now a lot of fun. |
|
| Author: | Jori [ 24 Nov 2011, 15:31 ] |
| Post subject: | Yes, the new patch solves the |
Yes, the new patch solves the enemy markers at wider resolutions. Very good news for us widescreen players :) But well, nothing changed for me. Before the patch i was playing at 4800x900 because in that res, the enemy markers were ok. But after the patch I keep playing that resolution. I've tested the 5760x1080 and works well, but i have to low some graphics to get decent FPS and it doesnt look so well. As i was suposing, my best solution is keep playing at 4800x900 with graphics at high and a decent antialiasing. I just bought a GTX590 and have 3 monitors on the way. Can you tell me specific settings you were using for the various resolutions? I'm thinking you (and I) are Vram limited. If we turn down AA can we turn up the other settings? I've never done widescreen gaming before and there is a huge learning curve as I am seeing reading these forums. VRam limited? Why you say that? mmmm.... It's curious you say that, because i had troubles with a game because it was crashing and saying that "DirectX bla bla bla bla... You dont have enough VRAM bla bla bla". I solved my crashes, but it has nothing to do with Wide resolutions or the same GTX 590. I had that crashes because i didnt have Pagefile setted on Windows. I have an SSD and 8GB of RAM and in some forums sayid that was a good idea to disable pagefile. But some days ago, i realized that my game crashes claiming about the VRam was about the missing pagefile. So i setted a pagefile in my system and i've never seen that message again and i dont have any kind of game crash now. I play at 4800x900, witha graphics at HIGH except for the EFFECTS and SHADOWS that i have setted to medium. Then the AA is 2X, and POSTAA to MEDIUM. Ambien oclusion is DISABLED, ANISOTROPIC is set to 2X and BLUR DISABLED also. With that config i have between 50 - 60 FPS If i set to 5760x1080, with graphics at MEDIUM except for the EFFECTS and SHADOWS at LOW. Then the AA is 2X, POSTAA is disabled. Ambien Oclusiond DIABLED, ANISOTROPIC to 2X and BLUR DISABLED. With that config i have between 30 - 40 FPS So i preffer playing at 4800x900 config. The lower resolution is messing a bit, I know. But in general, the game looks better and i have more FPS, so i prefer it. |
|
| Author: | Jori [ 24 Nov 2011, 20:58 ] |
| Post subject: | Mmmmm, after testing the new |
Mmmmm, after testing the new patch, I've encountered some new bugs. When playing at 5760x1080, the menu its kind of buggy with mouse. The mouse pointer and the mouse location doesnt match. If i point to a button with the mouse, the point seems to be missplaced. It's not a great missplace, something like 1 centimeter or like, but it is. Also.... when playing, when you look at the base markers on the HUD (not the map ones), if you look at any other direction, the markers doesnt go to other screens, they are stucked on the middle screen. I understand that that is not a bug, but well, I would say that it is, because if you look to the right of the base you are looking at (looking at left doesnt happen), the base marker doesnt stop at the left side of the monitor (logically it should do). The marker stops at 2 o 3 centimeters inside on the left of the middle monitor, so.... definitively its a bug. (sorry for this last explanation, its a little hard to tell with my english :S) The other bug i've encountered is when playing at 4800x900 (my native res is 5760x1080 but). If i initialize the game at 4800x900, the HUD, MAP and the ingame MENU is super missplaced to the right screen. To fix that i have to enter the video settings (without quiting obviously) and change to a different resolution (doesnt matter wich i pick up), apply that, and change again to 4800x900. When i do this, the HUD, MAP and MENU is showed OK now, and the mouse pointer location match the buttons (not like the above bug when playing at 5760). I'm playing at 4800x900 (i prefer), so every time i want to play the game, i have to do this thing change resolution to properly view the HUD. Damm patches!. At this point i dont know what is worse, the cure or the illness. |
|
| Page 11 of 12 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|