Widescreen Gaming Forum
http://www.wsgf.org/phpBB3/

MY FIRST experience with HD5000 series (FAIL)
http://www.wsgf.org/phpBB3/viewtopic.php?f=66&t=18402		 Page 1 of 2
Author:  jayhigh [ 18 Nov 2009, 15:58 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
i finally got my ATi HD5770

SO FAR I DO NOT LIKE IT IN TERMS of multi monitor support

i am using the newly release 9.11 driver
on windows 7 RC eval x64 on a machine with 8gig ram and c2d E8500

1) i have 3x Acer x203w
some how i recently was able to get 5040x1050 rez on a TH2g box via and GeForce8800GTS (was not the case before, though matrox had new drivers)

with the TH2G in conjunction with HD5770, i only can get all the wide screen (3x)3:4 aspect screens like 3072x768 etc.
so HD5770 + TH2g does not allow me (3x)16:10 resolutions.

2) i try to set up a dual monitor setup. (NO TH2g involved)

again FAIL.

i tried to use (2x) Acer x203w in a (1x2) display group.
I WANTED to achieve 1680x2100
a) in CCC under destop&displays, i see my 2 monitors and have them mirrored
b) then in the 1 display, i choose 'display group', and select 'create group'
c) selected "2 Displays (1 x 2)" (also tried 2 Displays (2 x 1))
d) the monitors go off and then back on twice
e) the CCC freezes to a point where i can NOT click on anything in the CCC dialogue box except 'options' -> help ( everything else is greyed out or un-clickable and both 'OK' and 'APPLY' are greyed out

f) i close out CCC, and open up CCC again
g) i am in desktop and displays, it shows the display group
h) under the display group's properties, it was automatically set a 1600x1200 (basic), and when i select 1690x2100 (grouped), it would reject my selection and bring me back up to 1600x1200
i) desktop options for grouped were 800x1200, 1280x2048, and 1680x2100, where ONLY 800x1200 successfully worked

at the moment im going to say is WTF !!!

is it the driver, or monitor??

going to try another driver.. both old and maybe there are win7 RC eval specific drivers??
Author:  AussieTimmeh [ 18 Nov 2009, 16:39 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
I'd love to give you a tutorial on how to get it working but setting up my 5850 was such a nightmare, I can't even remember what got it to start working, I think it just finally gave in.

Pioneering new stuff, always fun.
Author:  flopper [ 18 Nov 2009, 16:49 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
catalyst need several attempts to set it right.
so its not just go from 2 single display directly to eyefinity as it need to configure the screens. I had some issues going back and forth.
Author:  jayhigh [ 18 Nov 2009, 17:09 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
i got a LAME friggin reply from an Ati admin in the Ati AMD forum saying that Eye-finity isnt properly supported on the WINDOWS 7 RC evaluation...

but googling showed me that there are links to make your eval to retail...

anyways,
can you tell me the steps that you did to get your eye finity to work? also, what is your OS and system specs...
Author:  flopper [ 18 Nov 2009, 17:45 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
I basically just did the same thing again.
First time I got greyed out and locked.
Redid and worked.

amd forum admin isnt that helpful.

I use windows 7 64bit RC
5850.
ccc 9.11 whql.
Just set eyefinity again using 5760x1080 as I type this.
I have a 5850 but that shouldnt matter and I am using a native DP screen the dell P2210hd.

Even if it isnt supported w7 RC it should work as basically its the same OS.
Author:  jayhigh [ 18 Nov 2009, 18:12 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
WTF..

isnt working for me....
i tried to go in a couple times, same story...even try to apply and reboot.

NVIDIA nVIEW on XP PWNs= UbEr L33T

if i can get your exact steps, i would appreciate it..
Author:  jayhigh [ 18 Nov 2009, 18:47 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
i would enable a 2x1 display group, close and then go into windows properties, i get this error, when i try to apply 1680x2100

Author:  jayhigh [ 18 Nov 2009, 21:34 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
just tried it with drivers that were on the CD, version 8.66RC

it is also a NO GO.


WTF again.
i bought this for Eye-finity, and it dosent work...

i mean come on..is it the monitors?

im like so going back to my nvidia w TH2G...
Author:  alxnet2003 [ 18 Nov 2009, 21:48 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)
I'd love to give you a tutorial on how to get it working but setting up my 5850 was such a nightmare, I can't even remember what got it to start working, I think it just finally gave in.

Pioneering new stuff, always fun.


Dang, my setup worked right away with no problems or quirks.

BTW, ATI's control panel layout is confusing as hell. They could do a MUCH better job of simplifying Eyefinity/multimon setups for those not familiar with it.
Author:  thatdude90210 [ 18 Nov 2009, 21:50 ]
Post subject:  MY FIRST experience with HD5000 series (FAIL)

WTF again.
i bought this for Eye-finity, and it dosent work...
im like so going back to my nvidia w TH2G...

Is it a fresh Windows install? Otherwise it could be old drivers from NV or TH2G interfering with the ATI drivers.
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/