Widescreen Gaming Forum

hey all.

My Apple active displayport to DVI-D came today.

So i put it all together and i have a problem!

If i use the DP on its own i get a good display perfectly fine.

As soon as i have all 3 monitors on and try and detect them all the MINIDP one wont go higher then 1920x1080 at 30iHZ..... and its got a very fast flicker due to the 30Hz..

I cant for the life of me change this as it will just refuse to change any options!

Any ideas people?

EDIT:
If i start with just the MiniDP screen on its perfect, Add second screen i have 2 screen extended, as soon as i add the 3rd screen the MiniDP ported monitor shuts off and the CCC will detect that both DVI monitors are on and the MiniDP is disabled...
Im deffo useing an active cable as its useing USB as power.

There is no way its letting me turn all 3 monitors on now....

Welcome to the club of DP>DVI Adapter hell. Hopefully someone with a bigger brain than me can eventually work out what the problem is.

The only thing I can suggest is try a $20 DP>VGA adapter as that works the best for me. Still some minor issues, but 100% stable once I have it set.

Hi
no can do as it's a 5970 it's a minidp.
Also VGA can't do 1920x1200 can it?

This is upsetting me and I may put a call through to sapphire

I'm looking for an extention for my wall plug so I can use my 1a 5-9v USB plug... That may help?

I defo fell that the 5970 has not enough signal grunt to do 3 monitors..
The 5870 had a bios update to solve this and I would rather ati made one for the 5970.
But being ati I don't think they care about the people dropping £550 on a card! Spent over £800 on this card so far!

Also VGA can't do 1920x1200 can it?

Yes, yes it can, infact it will operate up to 2048x1536 also known as QXGA :wink:

_________________
| Gigabyte X79S-UP5-WiFi Skt2011 | i7 4820k @4.4GHz Watercooled (Ivy Bridge-E) | Corsair Vengence 32GB @2133MHz 11-11-11-27 2T Quad-Channel (8x4GB) | AMD R9-Fury-X 4GB @1140/505MHz + EKWB Watercooled | 256GB Crucial MX200 SSD | 8x 1TB Samsung F3 SATA-II | Corsair 850W TX PSU | 3x Dell S2209W 22"wide TFT's (5760x1080res) | Logitech Z-5400 5.1ch speakers | Win7 Ultimate x64 |

Hi
I did try a dp to VGA and it was all flikering and wud not do more then 1600x1200
I found a lenovo l2440x for £308! Normaly £ 460 here but I found one as ex display :) it has a display port input!!!! Soo this should solve the stupid problem!

But I will keep at it! I'm writeing a report about this issue for uni and will publish it here wen I'm done

UPDATE!

I plugged in my Apple active Minidp-DVI and now i can do extended on all 3 monitors PERFECTLY no problems there.

BUT When i try to activate eyefinity it says NO and i loose the display port monitor.

Any ideas?

EDIT!

Ok i WIN!!!! I disabled all but display port monitor :D then created a group and all came flashing on and im in eyefinity with NO FLICKERING!"!!

I now need to Unorder that Native DP monitor i purcahsed... or sell it on... hmmm
How do i use 4 monitors? lol