Widescreen Gaming Forum

[-noun] Web community dedicated to ensuring PC games run properly on your tablet, netbook, personal computer, HDTV and multi-monitor gaming rig.
It is currently 12 Dec 2024, 10:07

All times are UTC [ DST ]




Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: 28 Feb 2010, 19:10 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
I purchased an MSI 5670 video card and a Dell displayport monitor. I already had 2 acer monitors. I only have the option to create a 2 monitor group. 3x1 or 1x3 is not an option. Any ideas? Is the display port on my monitor a passive port?

dell monitor link - http://accessories.us.dell.com/sna/p...4&sku=320-8103
video card link - http://www.newegg.com/Product/Produc...82E16814127477

22" acer monitor 1 (1680x1050 native) - connected using DVI to DVI cable
22" acer monitor 2 (1680x1050 native) - connected using HDMI to DVI cable
22" dell monitor (1680x1050 native) - connected using display port to display port cable

thanks,
:( :( -Scott Baker


Top
 Profile  
 


PostPosted: 28 Feb 2010, 19:32 
Offline
Editors
Editors
User avatar

Joined: 10 Jun 2005, 21:24
Posts: 1371
It should work. Do you get an image on all 3 screens?


Top
 Profile  
 
PostPosted: 28 Feb 2010, 19:34 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
It should work. Do you get an image on all 3 screens?


I can run any combination of 2 monitors using the windows display settings or the catalyst control center.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 19:37 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
It should work. Do you get an image on all 3 screens?

I never get an image on all 3 at the same time as I have no way to make all 3 active.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 19:38 
Offline
Editors
Editors
User avatar

Joined: 10 Jun 2005, 21:24
Posts: 1371
Look through this video and make sure that you have the setup correct. :)

http://www.youtube.com/watch?v=aYorUpN4PQo&feature=autofb


Top
 Profile  
 
PostPosted: 28 Feb 2010, 19:49 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
Look through this video and make sure that you have the setup correct. :)

http://www.youtube.com/watch?v=aYorUpN4PQo&feature=autofb


Unlike in the video when I go to duplicate the 3rd monitor it tells me I have to disable one of the other 2.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 19:55 
Offline
Editors
Editors
User avatar

Joined: 10 Jun 2005, 21:24
Posts: 1371
Can you setup all 3 screens in clone mode (so that all 3 screens show the same desktop picture)? Remove all groups before this.

This might be a stupid question, but are you using windows XP by any chance? Eyefinity doesn't work in XP.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 20:14 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
Can you setup all 3 screens in clone mode (so that all 3 screens show the same desktop picture)? Remove all groups before this.

This might be a stupid question, but are you using windows XP by any chance? Eyefinity doesn't work in XP.


I'm running Windows 7 64 bit with the 10.2 catalyst suite. MSI tech support told me I still needed an active displayport adaptor even though my monitor has displayport. That's not true is it?

I suppose I could try 32 bit Windows 7 and or the 10.3 drivers.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 20:16 
Offline

Joined: 28 Feb 2010, 19:06
Posts: 17
Can you setup all 3 screens in clone mode (so that all 3 screens show the same desktop picture)? Remove all groups before this.

This might be a stupid question, but are you using windows XP by any chance? Eyefinity doesn't work in XP.


I can only duplicate or clone 2 monitors at once using CCC or the windows display settings.


Top
 Profile  
 
PostPosted: 28 Feb 2010, 20:45 
Offline
Editors
Editors
User avatar

Joined: 10 Jun 2005, 21:24
Posts: 1371
[quote]Can you setup all 3 screens in clone mode (so that all 3 screens show the same desktop picture)? Remove all groups before this.

This might be a stupid question, but are you using windows XP by any chance? Eyefinity doesn't work in XP.


I'm running Windows 7 64 bit with the 10.2 catalyst suite. MSI tech support told me I still needed an active displayport adaptor even though my monitor has displayport. That's not true is it?

I suppose I could try 32 bit Windows 7 and or the 10.3 drivers.

MSI is wrong. AMD recommends Displayport monitor over the use of adapter (under display configurations):
http://www.amd.com/us/products/technologies/eyefinity/tips-and-tools/Pages/tips-and-tools.aspx

There is a setup guide there also for 3 screens.

You have everything that you need for Eyefinity. I can't figure out why it doesn't work. Use the setup guide and see if you have done everything correct:
http://www.amd.com/us/Documents/Setup_Guides.pdf

You have:
Windows 7 or Vista - check
Eyefinity capable GFX card - check
Two displays connected to either HDMI or VGA - check
One display connected to display port via native DP or adapter - check

You could try to install 10.3, but it should work with 10.2 anyway. Going 32-bit is a waste of time.

Do as following. Uninstall then previous drivers. Before restart, go into display manager and manually change the display drivers to standard vga.
Go into:
C:UsersTamlin(change to your username)AppDataLocalATIACE
Delete the whole folder.

Restart and then install the 10.3. Remember to right-click on the install file and "run as administrator". . :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  




Powered by phpBB® Forum Software © phpBB Group