Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
Problem With TripleHead2Go and FSX 2D View http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=17840 |
Page 8 of 8 |
Author: | TomG628 [ 21 Nov 2009, 07:00 ] |
Post subject: | Problem With TripleHead2Go and FSX 2D View |
Wow, Thanks for taking the time to do that to the file, George. :D I'll let you know how it works out as soon as I get a chance to try it. Regards, Tom |
Author: | petercaurora [ 11 Feb 2010, 20:32 ] |
Post subject: | Re: Problem With TripleHead2Go and FSX 2D View |
Hey guys I am new to this forum and i created an account specifically to answer this this thread. I have 2 sperate machines both running the TH2Go in 1680x1050 and have encountered the same issue on both. Here is how I solved the problem on both (excuse the nubeness). Load up FSX. go to settings > graphics > customize and reduce the resolution to the TH2Go default before any firmware upgrade (3840x1024) Click Fly Now. At this point you should be able to see a 2d panel without the cursor acting crazy. If not, reduce the resolution even more. Click on the panel (still in 2d cockpit mode) and resize it to a very small size (about a quarter of 1 screen) Now click on file, save flight (check the default flight checkbox). exit FSX. When you go back in, go back to settings and set your resolution to be whatever you want. Fly Now. Once back in, you should see your new resolution but the 2d panel window is still small. you can now resize (full screen or whatever) it and save flight again (default checkbox checked) That should do it, every time you bring up your 2d panel, it should behave normally. Note, you will have to do this for all flights (planes) you fly and save them. Hope this helps.... peter. |
Author: | davyp3 [ 16 Dec 2010, 21:00 ] |
Post subject: | Re: Problem With TripleHead2Go and FSX 2D View |
Hi guys. I was wondering if anybody is running Level-D 767 and got it working properly with triple wide? In my case 5760x1080. I have the penel.cfg all figured out correctly and I have saved a default flight that which WORKS, unless for the missions that comes with the level-d 767. Anybody figured out how to edit the missions so that they use my working panel config? Because they just donĀ“t. |
Author: | MaxArk68 [ 12 Jun 2012, 02:56 ] |
Post subject: | Can't Fully Grasp This Concept |
In most part, this thread has been a great help .... I've managed to get most of my panels configured properly for the DA Fokker 100. At least most are sized to not not be lost with the pulsing cursor from hell. They can not be easily resized using the handles, and moved around. But I am having problems with two panels in particular. The overhead panels. Code: [Window03]
file=MM_F70100_OVHL.bmp //size_mm=641,517 size_mm=1280 window_size=0.333, 1.21875 position=1 visible=0 ident=5010 zorder=6 gauge00=F70100_XML_IF!ELEC, 341, 116, 297, 524 gauge01=F70100_XML_IF!BLEED, 952, 11, 300, 437 gauge02=F70100_XML_IF!PRESS, 650, 650, 299, 315 gauge03=F70100_XML_IF!ANTIICE, 345, 657, 300, 112 gauge04=F70100_XML_IF!HYDR, 33, 200, 300, 459 gauge05=F70100_XML_IF!APU, 954, 447, 298, 522 gauge06=F70100_XML_IF!FUEL, 647, 105, 297, 376 gauge07=F70100_XML_IF!ENG, 649, 482, 301, 164 gauge08=F70100_XML_IF!LIGHTS, 344, 770, 300, 200 gauge09=F70100_XML_IF!CALLS, 39, 658, 297, 309 gauge10=F70100_XML_IF!FAC, 34, 52, 298, 144 gauge11=F70100_XML_IF!PVO_OVHL_Close, 1220, 115, 50, 50 gauge12=F70100_XML_IF!PVO_OVHL_Close, 0, 115, 50, 50 gauge13=F70100_XML_IF!PVO_OVHL_Close, 0, 1025, 50, 50 gauge14=F70100_XML_IF!PVO_OVHL_Close, 1220, 1025, 50, 50 gauge15=F70100_XML_IF!PVO_OVHL_Top, 47, 110, 1160, 21 gauge16=F70100_XML_IF!PVO_OVHL_Bottom, 47, 1039, 1160, 21 [Window04] file=MM_F70100_OVHU.bmp size_mm=1280 window_size_ratio=1.000 position=7 visible=0 ident=5011 window_size= 0.333, 1.000 zorder=7 gauge00=F70100_XML_IF!MSU, 647, 245, 298, 107 gauge01=F70100_XML_IF!HYDR, 33, 686, 300, 459 gauge02=F70100_XML_IF!ELEC, 341, 599, 297, 524 gauge03=F70100_XML_IF!BLEED, 952, 494, 300, 437 gauge04=F70100_XML_IF!FUEL, 647, 591, 297, 376 gauge05=F70100_XML_IF!FAC, 34, 537, 298, 144 gauge06=F70100_XML_IF!AVP, 35, 359, 297, 172 gauge07=F70100_XML_IF!FIRE, 341, 431, 606, 158 gauge08=F70100_XML_IF!APU_FIRE, 954, 358, 298, 133 gauge09=F70100_XML_IF!CVR, 339, 56, 302, 117 gauge10=F70100_XML_IF!ELT, 341, 354, 301, 76 gauge11=F70100_XML_IF!OXYGEN, 644, 355, 303, 74 gauge12=F70100_XML_IF!TEST, 342, 174, 301, 177 gauge13=F70100_XML_IF!PVO_OVHU_Close, 1220, 5, 50, 50 gauge14=F70100_XML_IF!PVO_OVHU_Close, 0, 5, 50, 50 gauge15=F70100_XML_IF!PVO_OVHU_Close, 0, 915, 50, 50 gauge16=F70100_XML_IF!PVO_OVHU_Close, 1220, 915, 50, 50 gauge17=F70100_XML_IF!PVO_OVHU_Bottom, 47, 930, 1160, 21 Unlike the other panels, I can't find it when selected, and I get the blinking cursor. While toying around, I changed the window_size for Window03 (size_mm=641,517) but this resulted in the panel image being cropped, but was accessible. Here is the code for the main panel, which once edited is workable after having once exhibited the same problem as the overheads. Code: [Window00]
file=MM_F70100_MPNL.bmp size_mm=1280 window_size_ratio=1.000 position=4 visible=1 //no_luminous=1 ident=MAIN_PANEL window_size= 0.333, 1.000 //window_pos= 0.000, 0.000 zorder=0 gauge00=F70100_XML_IF!ABS, 1108, 558, 92, 104 gauge01=F70100_XML_IF!EFIS, 378, 348, 304, 92 gauge02=F70100_XML_IF!GIAS, 654, 622, 119, 119 gauge03=F70100_XML_IF!GATI, 720, 483, 128, 103 gauge04=F70100_XML_IF!GATI_Knob, 820, 585, 40, 40 gauge05=F70100_XML_IF!AFCAS, 689, 314, 592, 121 gauge06=F70100_XML_IF!FWS, 326, 370, 32, 63 gauge07=F70100_XML_IF!SRC_SEL, 86, 763, 63, 190 gauge08=F70100_XML_IF!SRC_SEL_CPT, 47, 754, 33, 183 gauge09=F70100_XML_IF!SRC_SEL_ADF, 155, 845, 30, 63 gauge10=F70100_XML_IF!LDG_Lever, 1261, 446, 19, 268 gauge11=F70100_XML_IF!CLK, 174, 590, 131, 131 gauge12=F70100_XML_IF!STBY_ALT, 786, 619, 127, 125 gauge13=F70100_XML_IF!RMI, 719, 753, 129, 158 gauge14=F70100_XML_IF!GPWS_LIGHTS, 653, 480, 62, 129 gauge15=AOG_F70100!MASTER, 0, 0, 1, 1, 1102 gauge16=AOG_F70100!MFDU_L_DISP, 958, 702, 239, 205, 1 gauge17=AOG_F70100!TRP, 977, 483, 112, 129 gauge18=AOG_F70100!ADS, 101000, 0, 1, 1 gauge19=AOG_F70100!DU_U_DISP, 366, 495, 239, 205, 1 gauge20=AOG_F70100!DU_L_DISP, 366, 747, 239, 205, 4 gauge21=AOG_F70100!WINDOW, 0, 0, 1280, 304 gauge22=F70100_XML_IF!PVO_MAIN_Top, 25, 0, 550, 21 gauge23=F70100_XML_IF!PVO_MAIN_Right, 1200, 680, 21, 243 gauge24=F70100_XML_IF!PVO_PEDESTAL_Forward, 619, 930, 625, 21 gauge25=F70100_XML_IF!ALAND, 233, 402, 30, 23 gauge26=F70100_XML_IF!PVO_RADIO, 1055, 284, 200, 21 gauge27=F70100_XML_IF!GPWS_GS_INH, 679, 873, 35, 37 gauge28=F70100_XML_IF!SPDBRK, 278, 562, 20, 17 gauge29=F70100_XML_IF!STBY_COMP, 1075, 82, 78, 40 gauge30=F70100_XML_IF!STBY_COMP_LIGHT, 1144, 65, 21, 17 gauge31=F70100_XML_IF!PVO_MAIN_Gear, 1231, 746, 54, 129 gauge33=F70100_XML_IF!PVO_MAIN_Util, 5, 884, 40, 50 gauge34=F70100_XML_IF!PVO_MAIN_FMC, 1229, 884, 40, 50 gauge35=F70100_XML_IF!LETTER, 867, 481, 91, 27 gauge36=F70100_XML_IF!PVO_System, 2, 2, 1, 1 gauge37=F70100_XML_IF!OVHD_MAIN, 600, 0, 679, 36 gauge38=F70100_XML_IF!LDG_Left_Light, 1259, 812, 17, 10 The main panel is in the centre monitor of my spanned display and looks a bit out of place. the other two monitors have the black bars. |
Author: | nigel670 [ 03 Oct 2013, 19:10 ] |
Post subject: | Re: Problem With TripleHead2Go and FSX 2D View |
I to have been trying to set up 3 monitors using th2g digital edition and have had no luck with it I am at present talking to matrox to solve my probs but not very fourth coming yet I have linked the 3 monitors together on a nvidia 650ti sorted the resolutions out and vow working fine except I to have half a black screen has anyone found a work around for this any help appreciated thanks |
Author: | TrakDah [ 29 Mar 2014, 19:53 ] |
Post subject: | Re: Problem With TripleHead2Go and FSX 2D View |
Thanks I've edited a few of my panel.cfg files, and I can confirm that it works. For some panels you do need to edit more than the MAIN section, for example the PMDG ones. Also, you can eit other sections to give you the look/position you want for the panels now that you have the luxury of 3 screens. So I joined the Forum to be able to thank you guys, Thanks! |
Page 8 of 8 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |