| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| Upgrade vx2262wm http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=16713 |
Page 1 of 2 |
| Author: | antihero2 [ 12 Dec 2008, 11:34 ] |
| Post subject: | Upgrade vx2262wm |
I am considering dropping my old TH2G(VGA) setup 3x 940n Samsung For TH2G(digital) and purchase 3x vx2262wm viewsonic http://www.viewsonic.com.au/products/productspecs.php?id=352 The spec sheet lists the monitor as capable 50 - 76 Hz, so the Matrox 57Hz rquirement shouldn't be a problem I assume I am running Vista 64bit and nvidia card and im not totally confident that it would work so any advice is much much appreciated :) |
|
| Author: | svr [ 18 Dec 2008, 23:03 ] |
| Post subject: | Upgrade vx2262wm |
I'm thinking of getting this monitor too. Any input would be appreciated. I have noticed many viewsonic models support atleast fv 50-75 or higher range and work fine with TH2Go. And I have not seen many not working. |
|
| Author: | john bentley [ 10 Jan 2009, 03:37 ] |
| Post subject: | Upgrade vx2262wm |
svr, are you happy with your vx2262wm? |
|
| Author: | svr [ 11 Jan 2009, 13:41 ] |
| Post subject: | Upgrade vx2262wm |
Yes, I have 3 of these now for about a week and they are great. No dead pixels, very minimal bleed, monitor has aspect ratio scaling options too and no damned osd error messages. Colors could be a bit better but I found a color profile at digitalversus site and its pretty good now. Maybe I should get a calibrator some day. Review: http://www.digitalversus.com/article-358-3803-41.html Color profile: http://www.focus-numerique.com/test-42/telecharger-un-profil-calibre-pour-son-ecran-viewsonic-30.html I'm happy with this model and I would recommend it for anyone. |
|
| Author: | john bentley [ 12 Jan 2009, 06:03 ] |
| Post subject: | Upgrade vx2262wm |
svr, thanks! The link to digitalversus is very helpful to those of us trying to make a choice. They have a good review system. On the vx2262wm: I like, at least, how it looks (the curves). |
|
| Author: | john bentley [ 14 Jan 2009, 12:23 ] |
| Post subject: | Upgrade vx2262wm |
Some users of various LCD monitors report humming which can be corrected by increasing brightness levels. svr, are there any noise issues with this monitor? |
|
| Author: | svr [ 14 Jan 2009, 16:08 ] |
| Post subject: | Upgrade vx2262wm |
Some users of various LCD monitors report humming which can be corrected by increasing brightness levels. Yes and no, at max 100 brightness it is silent but a bit too bright for my eyes. There is some buzzing noise if I drop brightness few steps. And it is silent at 60 brightness which is good for me. This model also has speakers but I didnt bother with them. Stand is just ok, could be more stable but it is not an issue if you got good table or wall mount. |
|
| Author: | john bentley [ 27 Jan 2009, 07:51 ] |
| Post subject: | Upgrade vx2262wm |
Hi svr, I'm looking to verify that the VX2262wm will fit the Ergotron Lx Triple Monitor Lift Stand. Could I trouble you to verify that the *outside* width and depth dimensions of the VX2262wm are according to the listed spec (which doesn't mention that they are outside dimensions)? Stated Viewsonic dimensions: 508.7mm(W) x 202.8mm(D) (x 440.6mm(H) I'm not interested in height) From Dimensional illustrations (PDF) for the Lx Triple stand we have maximum outside dimensions of: 514.3 mm (w), 50.8 mm (D). Thanks. |
|
| Author: | svr [ 27 Jan 2009, 14:44 ] |
| Post subject: | Upgrade vx2262wm |
Stated Viewsonic dimensions: 508.7mm(W) x 202.8mm(D) (x 440.6mm(H) I'm not interested in height) Reported specs are correct. Could you report back if you get the stand and monitors. I would like to see it in action. |
|
| Author: | john bentley [ 28 Jan 2009, 03:43 ] |
| Post subject: | Upgrade vx2262wm |
I've just posted 2009-01. The best 22" widescreeen all round monitor. (under "Hardware Discussions"). After a large round up of monitors I conclude that the ViewSonic VX2262wm seems to be one of the few worthy options. The only option for Australians. I have yet to purchase it, though, to confirm this first hand. |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|