Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
Prey (2017) http://www.wsgf.org/phpBB3/viewtopic.php?f=68&t=32081 |
Page 2 of 4 |
Author: | HaYDeN [ 07 May 2017, 10:19 ] |
Post subject: | Re: Prey (2017) |
NOTE: Pretty much entirely untested. |
Author: | HaYDeN [ 07 May 2017, 10:48 ] |
Post subject: | Re: Prey (2017) |
There was a bug I discovered about 20 mins after release where monitors (in-game) are black - I've since updated the fix, if your having that problem, right click the fix and click re-install. There also seems to be a problem with the HUD being on the left monitors depending on your monitor aspect ratio, ie. 21:9 |
Author: | dt1000 [ 07 May 2017, 13:09 ] |
Post subject: | Re: Prey (2017) |
HaYDeN, you are a legend as always! |
Author: | Csavez [ 07 May 2017, 15:45 ] |
Post subject: | Re: Prey (2017) |
Yes HaYden! My old video. https://youtu.be/KD6zbvf0834 |
Author: | Csavez [ 07 May 2017, 15:50 ] |
Post subject: | Re: Prey (2017) |
Author: | pudel [ 07 May 2017, 15:54 ] |
Post subject: | Re: Prey (2017) |
@hayden thx for the fix. however flws gives me error: "failed to open process. error code=5". what could be wrong? |
Author: | HaYDeN [ 07 May 2017, 18:03 ] |
Post subject: | Re: Prey (2017) |
pudel wrote: @hayden thx for the fix. however flws gives me error: "failed to open process. error code=5". what could be wrong? Error code 5 is access denied, would suggest you are not running FWS with sufficient privileges. |
Author: | HaYDeN [ 07 May 2017, 18:06 ] |
Post subject: | Re: Prey (2017) |
Changed the position of the injection for HUD centering, update is live, click Check for Updates. May or may not break a bunch of stuff, it seems to work for me on both 16:9 and non 16:9 resolutions. |
Author: | themanatee [ 08 May 2017, 17:19 ] |
Post subject: | Re: Prey (2017) |
Great work as always hayden. Just a question. Is weapon FOV manipulation even a possibility for a future revision? People have been trying r_drawnearFOV since it's on cryengine but this command hasn't been working. |
Author: | Ufolog [ 10 May 2017, 23:09 ] |
Post subject: | Re: Prey (2017) |
Thank you HaYDeN! Buy I experience a trouble using Flawless Widescreen. The game menu and all in-game interface have dissapeared once fix is enabled. Disabling it and switching to desktop and back brings all back again. Below is some console logs when I'm enabling/disabling the fix Thanks. Code: DisplayDetection -> Scanning process for signs of SoftTH injection c_HackTool -> Successfully opened process, ID=2120 Suspending Thread HUDFix1 - Addr=Prey.exe+2A96E8 HUDFix2 - Addr=Prey.exe+2A96FB HUDFix3 - Addr=Prey.exe+2A9992 FOVPtr - Addr=Prey.exe+240D5B0 (Acquired) FOVPtr - Addr=Prey.exe+FFFFFFFEFFE1E968 (float=120.00) (Offset=8) Un-Suspending Thread Configure Success = true Inject delay: 1500ms, Configure() took: 275ms, Adjusted Inject delay: 1225ms Actual delay: 1225ms Suspending Thread c_HackTool -> JMP candidate for HUDFix3_cc, NOPS=0, Address=0x1402a9992 c_HackTool -> Successfully allocated 4096 bytes at 0x14a3e0000 for ASM block "Fixes" c_HackTool -> Assembly compile was successful Un-Suspending Thread DisplayDetection -> Resolution change detected DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0} DisplayDetection -> * Display (1/2): Res: 0x0, Pos: {X:0, Y:0} DisplayDetection -> * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0} DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> No displays associated with this device. DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series DisplayDetection -> Scanning process for signs of SoftTH injection c_HackTool -> Successfully opened process, ID=2120 Suspending Thread HUDFix1 - Addr=Prey.exe+2A96E8 HUDFix2 - Addr=Prey.exe+2A96FB HUDFix3 - Addr=Prey.exe+2A9992 FOVPtr - Addr=Prey.exe+240D5B0 (Acquired) FOVPtr - Addr=Prey.exe+FFFFFFFEFFE1E968 (float=120.00) (Offset=8) Un-Suspending Thread Configure Success = true Suspending Thread c_HackTool -> JMP candidate for HUDFix3_cc, NOPS=0, Address=0x1402a9992 c_HackTool -> Successfully allocated 4096 bytes at 0x17fd10000 for ASM block "Fixes" c_HackTool -> Assembly compile was successful Un-Suspending Thread DisplayDetection -> Resolution change detected DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0} DisplayDetection -> * Display (1/2): Res: 0x0, Pos: {X:0, Y:0} DisplayDetection -> * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0} DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> No displays associated with this device. DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series DisplayDetection -> Resolution change detected DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> Eyefinity Display Detected, Res: 1920x1080, AR: 1.78, Position: {X:0, Y:0} DisplayDetection -> * Display (1/2): Res: 0x0, Pos: {X:0, Y:0} DisplayDetection -> * Display (2/2): Res: 1920x1080, Pos: {X:1920, Y:0} DisplayDetection -> Found AMD Device: AMD Radeon R9 200 Series DisplayDetection -> No displays associated with this device. DisplayDetection -> NVIDIA Library not found, skipping NVIDIA detection DisplayDetection -> Preferred Display \\.\DISPLAY1 connected to AMD Radeon R9 200 Series Specs: GPU - AMD R9 295X2, 5760x1080, Crimson 17.5.1, Prey Profile for Crossfire enabled, Win 10 64 bit. |
Page 2 of 4 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |