Widescreen Gaming Forum

Would love input from the WSGF community on a new build I am working on. I am wanting to build something powerful that will last and age very well for a few years.
Here's a little template for build advice requests I found (cheesy, but thoughtful):


Approximate Purchase Date: Mid-August 2011
Budget Range: <$3,000
System Usage from Most to Least Important: Gaming
Parts Not Required: None, buying everything new except mouse
Parts Preferences: No strong preference. But slightly partial to AMD only because it seems like more games have explicit "Eyefinitiy" support
Overclocking: Maybe
SLI or Crossfire: Yes
Monitor Resolution: 5760 x 1200

Additional Comments:
The components I have in mind at this point are 3 Dell U2412 displays (1920 x 1200 x 3) and the Core i7 2600k which seems like the best CPU for gaming at this point. I intend to, among other games, play BF3 at the highest possible graphics settings across three screens.

I am mainly interested in comments or suggestions for GPUs, CPUs, and Motherboards. Thank you kindly! :onethumb

Save $100USD and get a 2500K. You aren't going to lose anything noticeable when gaming. For motherboards, I believe only Gigabyte's UD7 boards have support for x16/x16 dual card-most LGA1155 boards only do x8/x8, x16/x4 or x16/x8.

The Sandy Bridge CPU's only have 20 PCI-e lanes so those NF200 chips are completely useless anyway. And apparently the new AMD platform "bulldozer" is coming out 19th September, if you can wait. We don't know a lot about it, but if you didn't wait the extra month, and it was quicker, you might be annoyed.

One part you didn't pay much attention to in the post is the power supply. If you are going on long, hot gaming sessions, the PSU is a crucial part. I would say get a minimum of a GOOD BRANDED 750+ watt unit. Look for one that has around 90% or more of its capactity at 12v. Something like a Corsair AX750, 850 or 1200, the Antec High Current series, pretty much anything with a Seasonic badge.

And another great addition to a gaming rig would be a SSD. They speed up loading times a lot, and improve general performance too, making everything snappier. I am looking at a Crucial M4 128GB as it seems all the Sandforce based drives are having various firmware issues (BSOD's, disappearing etc etc), the only other drive I haven't seen many problems with is the Intel 510 drive, but they cost a bit more than the Crucial. Hope that helped.

_________________
P8Z68-V Pro | 2600K | HR02 | HD5850 | 2x4GB Vengeance LP | 128GB M4 + 6TB | X-Fi > HD595 | AX850 | Tai Chi | PB278Q | G110 + Deathadder 2013
P8Z77-V | 3570K | Mugen 2 | HD5850 | 2x4GB Vengeance LP | 500GB | X-750 | Fractal R3 | U2212HM | G110 + G400
P8H77-I | G860 | 4650 | 2x2GB XMS | 320GB | CX500 | Prodigy | T22B350EW | MX518
DC3217IYE | 1x4GB Vengeance | 64GB M4 | TX-42VT20E

Thanks to the both of you! Last of the components arriving today.

The Sandy Bridge CPU's only have 20 PCI-e lanes so those NF200 chips are completely useless anyway

Never really understood the NF200 chip - isn't it supposed to double the bandwidth of those existing lanes? Why in particular does Sandy Bridge make a difference?

_________________
Rig 1: Intel i7-4790K Devils Canyon | ASRock Z97X Killer Intel Z97 Socket 1150 | Noctua D15 cooler | 16 GB G.Skill TridentX DDR3-2400 | 500GB Samsung 840 EVO SSD | Corsair AX1200i | 2x EVGA GTX980 4GB ACX2.0 (SLI)

Rig 2: Intel i5-2500K | ASUS P8P67 Pro Intel P67 LGA1155 | Corsair A50 cooler | 4GB G.Skill RipJawsX DDR3 RAM @1600mhz 6-8-6-24 2T | 128GB Crucial RealSSD C300 SSD | Corsair AX1200 | 2x Palit GTX580 1.5GB (SLI)