Widescreen Gaming Forum

I received my Ergotron LX Triple a couple of days ago and mounted 3 22" Samsumg 2253LWs on it. The Ergotron LX Triple handled the monitors perfectly. I too have the outer monitors tucked behind the center monitor to save bezel space. Tilt/Pan/UpDown all work as expected.

One person can install all three monitors with a little planning. First, think about how you want to install the monitors. In my case, I knew I wanted to tuck the side monitors under the center monitor to save bezel space. I mounted a spacer with longer screws to the center monitor and shorter thumb screws without spacers on the remaining monitors. Next, I assembled the Ergotron LX Triple and placed it on my desk. I mounted the center monitor with the spacer in the middle of the arm. Tighten the monitor mount enough to hold the monitor but allow it to be moved if needed. Now loosen the arm to lower it. Open the access door and use the 4mm wrench to turn the adjusting screw counter clockwise to loosen the arm tension. No matter which way you face the stand, turn the screw counter clockwise to loosen and clockwise to tighten. Lower the arm. This action lowers the center of gravity of the stand and allows you to mount the side monitors with little risk of tilting the stand. Adjust, align and tighten the monitors to your taste and you're done.

I was thinking about getting the Ergotron LX Triple to mount 3 KDS K-22B2W given the narrowness of the bezels i was hopeing to butt them side to side (no overlapping). Since a couple of you seem to have experience LX Triple does that seem possible (it seems like the case, I just want to make sure)?