Widescreen Gaming Forum

Quick question, are Steam Achievements still working with the fix enabled?

I've had steam achievment updates with Hayden+ launching with Skyrim4GB fix .

Quick question, are Steam Achievements still working with the fix enabled?

Yes they are working fine here. As is the overlay and Steam screenshot button in triple wide.

_________________
i7 sandy 4.4ghz with a snorkel
1080gtx
8gb RAM
Gigabyte P67-UD7 rev. B3
OS -Samsung 840pro 256GB ssd
Games -Samsung 840pro 500GB ssd
Pagefile -crucial 60GB ssd
Storage -2x 4TB WD
PWS -Seasonic Prime 1k Titanium

The Steam Overlay doesn't work for me... With or without Eyefinity fix. Dunno why. It never worked, although the popups for "Screenshot made" and the achievements work just fine... Really strange...

_________________
My Blog || YouTube Channel || Twitch Stream
My PC || Game Screenshots Archive

New Nvidia drivers are out. Which can be found here:

http://www.geforce.com/News/articles/nvidia-geforce-290-36-beta-drivers-released

They do include an update to Skyrim.

The drivers also add official support for Ambient Occlusion in The Elder Scrolls V: Skyrim.

I am installing now and will post if I see any other improvements.

_________________
Azza Fusion 4000 Liquid Cooled Full/Mini-ITX Tower - AMD Ryzen 1700x CPU - Tt Water 3.0 Ultimate CPU Cooler - ASUS ROG Crosshair VI Extreme - 2x EVGA GTX 980 in SLI - Geil 16GB - Klipsch 5.1 THX Speakers - Vertex 4 128GB SSD, Sandisk 256GB SSD, Samsung 512GB 850 PRO SSD, WD Black 320GB & Two times Toshiba 5TB (one for Games and the other for Storage) - Logitech G502 - Corsair K65 RGB - Logitech G13 - Win10 Pro 64bit - 2-over-1 Viewsonic VA2448M 24" (2x 1920x1080 Secondary) & Samsung CHG90 Series Curved 49" (3840x1080) - Ergotech Monitor Stand - Shout out to WSGF for the upgrade on my stand!

Thanks for that Kayden, downloading and installing now, curious to see improvements in BF3 specifically. Skyrim runs just fine so I'll report if they broke anything.

_________________
i7 sandy 4.4ghz with a snorkel
1080gtx
8gb RAM
Gigabyte P67-UD7 rev. B3
OS -Samsung 840pro 256GB ssd
Games -Samsung 840pro 500GB ssd
Pagefile -crucial 60GB ssd
Storage -2x 4TB WD
PWS -Seasonic Prime 1k Titanium

No prob Cinnabuns. I haven't seen any improvement with Skyrim, nor did it hurt anything either so that's good. I haven't tried BF3 because there are just a ton of problems with it and I haven't looked at it since Skyrim came out :bigsmile: . I did try Batman Arkham City, now if anyone was hoping it would fix the DX11 situation, sadly it does not. I ran in DX11 and DX9 modes, and saw no appreciable improvement, in the benchmarks sadly :( .

EDIT: Also you have to do the fix as mentioned before by helifax to get Ambient Occlusion working if you are using the LAA fix. I tried it and it worked just fine. Here is his description on what to do:

Ok, after a bit of fooling around:)) I managed to make the 4GB version to use the nVidia 3D Profile and SLI compatibility bits:

1. Download and install nVidia Inspector
2. Start Nvidia Inspector
3. Go to the driver profile settings
4. Select the Elder Scrolls V Skyrim profile
5. Click the button that says "add application to current profile" (small icon of a window with a plus-sign)
6. Navigate to your Skyrim installation and select TESV.exe
7. Before hitting OK in the Filename field append ".4gb" so the result should be "TESV.exe.4gb"
8. HIT OK
9. HIT "Apply changes"
10. Play the GAME

AGAIN THIS VALID ONLY FOR THOSE WITH nVIDIA cards in SLI and 3D VISION (SURROUND)


Best Regards,
Helifax

_________________
Azza Fusion 4000 Liquid Cooled Full/Mini-ITX Tower - AMD Ryzen 1700x CPU - Tt Water 3.0 Ultimate CPU Cooler - ASUS ROG Crosshair VI Extreme - 2x EVGA GTX 980 in SLI - Geil 16GB - Klipsch 5.1 THX Speakers - Vertex 4 128GB SSD, Sandisk 256GB SSD, Samsung 512GB 850 PRO SSD, WD Black 320GB & Two times Toshiba 5TB (one for Games and the other for Storage) - Logitech G502 - Corsair K65 RGB - Logitech G13 - Win10 Pro 64bit - 2-over-1 Viewsonic VA2448M 24" (2x 1920x1080 Secondary) & Samsung CHG90 Series Curved 49" (3840x1080) - Ergotech Monitor Stand - Shout out to WSGF for the upgrade on my stand!

My 8 months GTX 590 just died last night...really frustrating...
After several attempts to resuscitate it...it finally went down in flames... (not actual flames..just the pop-corn sparks:)))

To bad I'm stuck now only on my Alienware...

Now for the interesting part: Even if you have it like me on watercooling...NEVER EEEVEER change the damn 0.938 voltage....it will not burn instantly...only after a couple of months (maybe 8, maybe more, maybe less).... while the temperature remains in max 70 degrees on 100% load on both GPUs (25 degrees lower than upper limit on air ). So as you can see it is the damn VRM problem again...

Tomorrow is coming my new one.. (yes another GTX 590 as it is an awesome card + once you tested 3D Surround..well you can't get it out) ...
I am posting here from work and kinda hard to search for the correct section and since many people read here I said to give them a fair warning : "If your card is overclocked+overvoltaged return to STOCK ASAP ;)) "


Best Regards,
Helifax

_________________
WideScreen Fixer... Fixes your Surround problems to give a gorgeous 3D Surround Experience!
WideScreen Fixer

Only website to show TRUE 3D Vision Surround Gaming Videos(viewable by anyone) only at
3D Vision Surround Gallery

E-mail and Paypal (for people who wants it): [email protected]

once you tested 3D Surround..well you can't get it out

qft :onethumb

I've started to have a strange issue, all 3D models for my inventory have become really tiny. No idea what i did to shrink them, but you can hardly see them at all. not an issue yet, but if I have to examine an item for a puzzle, I'll be lost. Anyone have an idea what controls this?

edit, found out my lock pick screen is really small as well.

This happens with triplewide fixes or without, so I've somehow changed something in my .ini, but no idea what

Update 1.2 Patchlog:

UPDATE 1.2 NOTES (all platforms unless specified)

Improved occasional performance issues resulting from long term play (PlayStation 3)
Fixed issue where textures would not properly upgrade when installed to drive (Xbox 360)
Fixed crash on startup when audio is set to sample rate other than 44100Hz (PC)
Fixed issue where projectiles did not properly fade away
Fixed occasional issue where a guest would arrive to the player's wedding dead
Dragon corpses now clean up properly
Fixed rare issue where dragons would not attack
Fixed rare NPC sleeping animation bug
Fixed rare issue with dead corpses being cleared up prematurely
Skeleton Key will now work properly if player has no lockpicks in their inventory
Fixed rare issue with renaming enchanted weapons and armor
Fixed rare issue with dragons not properly giving souls after death
ESC button can now be used to exit menus (PC)
Fixed occasional mouse sensitivity issues (PC)
General functionality fixes related to remapping buttons and controls (PC)


After releasing the 1.2 update, we will continue to monitor forums, blogs, etc. for issues you are reporting, and we will keep you updated on further updates to improve your gameplay experience.

http://forums.bethsoft.com/index.php?/topic/1294882-12-update/

_________________
My Blog || YouTube Channel || Twitch Stream
My PC || Game Screenshots Archive