Widescreen Gaming Forum

Hi NightBits,

The patcher crashed on me when I run it. Is there any specific steps to apply the patcher?



[Update] Just checked your previous post. Seems like 5760x1080 resolution is not in the list of supported resolutions, so I guess that's why -_-

NOOOOOOOOOOOOOO!!!!

The 1.071 updates seems to have broken jackfuste's Marker Fixer.

Whenever I try to activate the fix, MGSV crashes.

Can anyone else confirm?

This is killing me!!

_________________
Gigabyte GTX 980 - SLI

i7-4770k @4ghz

16GB Ram

Planar SA2311W 3D Vision monitors (x3)

Windows 7 x64 Ultimate SP1

Update for v. 1.0.7.1

For 4:3 (800x600, 1024x768 etc.)
mgsvtpp.7z

For 5:4 (1280x1024)
mgsvtpp.7z

For 2560x1080
mgsvtpp.7z

For 3440x1440
mgsvtpp.7z

For 48:10 (5040x1050; 5760x1200 etc.)
mgsvtpp.7z

For 48:9 (4800x900; 5760x1080 etc.)
mgsvtpp.7z


Markers fix:

For 2560x1080; 3440x1440
21_9_marker_fix_1_071.7z

For triple 16:9 screen 11520x2160; 5760x1080; 4800x900 etc.
48_9_marker_fix_1_071.7z

For triple 16:10 screen 5760x1200; 5040x1050 etc.
48_10_marker_fix_1_071.7z


Cheat Engine table:

mgsvtpp_1071.7z

First value should be changed
from
F3 0F 59 0D 83 8A FB FE
to
F3 0F 59 0D 87 8A FB FE
this fixes marker position.

Second value - 64, is size for marker and some ui elements.
Proper value should be calculated by formula:
64 * ((width/height)/1.77777)
For example, 64 * ((6000/1080)/1.77777) = 200.00087
So, 64 should be changed to 200.00087

Third value should be changed
from
F3 0F 5E A9 0C 01 00 00
to
F3 0F 59 A9 0C 01 00 00
this fixes sonar effect.

Fourth value should be changed
from
F3 0F 5E AA 0C 01 00 00
to
F3 0F 59 AA 0C 01 00 00
this fixes wind effect in the desert.

FOV Tool:

MGSTPP_FOV_1_071.7z

You, sir, are a life saver!! Or... an FOB saver at the least.

THANKS!!

_________________
Gigabyte GTX 980 - SLI

i7-4770k @4ghz

16GB Ram

Planar SA2311W 3D Vision monitors (x3)

Windows 7 x64 Ultimate SP1

Thank you jackfuste !!!

I don't understand why I can't use the IEEE-754 converter

I write 8040/1440 = 5,583333333333333 in the Value to Analyse and it just keep calculating without giving a result.

_________________
i7 4930k @ 4.5 Ghz with Quad R9 290x (Everything watercooled)
Triple 1440p monitors (middle is 4k but is ran in 1440p)

Where do I get v1.0.7.1 I know MGSV updated , but my .exe still says 1.0.7.0??

Try old version - http://babbage.cs.qc.cuny.edu/IEEE-754.old/Decimal.html
Input 5.583333333333333, but not 5,583333333333333


At last update, exe version still 1.0.7.0, but in game menu it shows Ver. 1.071

Again thanks to you Jackfuste.

Using your Cheat Table i can fix the markers but not flawlessly.
The x axis was correctly fixed but not the y that was "floating". And moreover the UI elements was some kind of "flatened".

So i search into your fix and found out that the X et Y ratio you force were not the good ones to apply to my specific resolution.
I mean the 16 & 9 ratios modified by yout cheat table.

In fact mine cannot be the 50 (X) and 9 (Y) used by the CT.
My specific resolution is 6012 * 1076 (for some reason the AMD bezel is a little bit broken which explain the 1076 instead of 1080).

The correct ratios for me would be 50.1 (X) and 8.96666 (Y) which is given by the next formula :
New X ratio = (Bezel width * basic 3 FHD screen X ratio) / basic 3 FHD screen width
Which gives 50.1 = (6012 * 48) / 5760
New Y ratio = (Bezel height * basic 1 FHD screen Y ratio) / basic 1 FHD screen height
Which gives 8.96666 = (1076 * 9) / 1080

Modyfing theses values at address accessed by the mulls assembly code could fix it the right way for me.



I could make a new cheat table but i put the exact 1420923F0 and 1420923F8 address as i don't know how to make it viable for everyone situation.
However, it seems to work for me every time i play the game.

I hope i make myself clear as i'm not english native.
Again big thank Jackfuste as you inspired me.

I cant get it to work for MGO.
Anyone know how to?