Well, after two years, my Samsung 204B died with a nice flashing power button like many with that monitor have experienced. So, I just went through the warranty replacement program and got a refurb Samsung 2243BWX.
I got the 2243BWX a few days ago, plugged it in, and noticed something odd: when I went to set a widescreen resolution, the result was always a virtual desktop. So, I used MonInfo to retrieve the EDID data from the monitor. Low and behold, the EDID information is generic and completely incorrect. It listed the monitor's maximum resolution as 1280x1024. So, that was the source of the problem.
So, I called tech support to try and find the correct EDID information. Only problem is, their useless tech support - even the highest tier - didn't even know what EDID is. The highest level tech insisted that it could not possibly be the monitor, since the monitor was passive and stored no information. He then went on to decide it must be the drivers. When told I had installed the latest drivers, the next point of blame was the video card itself, of course I have another widescreen monitor which the exact same video card drives without issue. When told this, the high tier tech support guy decided to blame it on the cable, and said that I must need a dual link DVI cable instead of a single link DVI cable. But of course, single link DVI supports up to 1920 x 1080 while the 2243BWX has a native resolution of 1680x1050, so that obviously could not be the problem. After that, the tech support guy was less than happy with me and basically started going through the chain of blame all over again, saying he'd been working on monitors for 10 years and had never heard of EDID. So ended that conversation.
Having gone through that nonsense, I decided to see if I couldn't just simply exchange the monitor for another. Apparently, Samsung does not allow you to exchange a warranty replacement for another if you find it defective or incapable of meeting your needs, so pretty much if they send you a defective warranty replacement, you're shit out of luck.
After spending 3 hours on the phone with Samsung's script monkeys, just for kicks, I found a Samsung 215TW's EDID and wrote that to my monitor. Suprise! It now works, even though EDID apparently doesn't exist according to Samsung and could never, ever cause the issue. If you're considering a monitor purchase, do yourself a favor and avoid Samsung and their incompetence. You'll save yourself a lot of aggravation.
Oh, and if anyone out there has a 2243BWX, I'd still like to get my hands on the correct EDID information. If you could please post it, I would very much appreciate it. You can get the information using MonInfo, a free utility, which you can download at http://www.entechtaiwan.com/util/moninfo.shtm . Just copy and paste the information from the report.
|