Widescreen Gaming Forum

[-noun] Web community dedicated to ensuring PC games run properly on your tablet, netbook, personal computer, HDTV and multi-monitor gaming rig.
It is currently 09 Dec 2024, 13:54

All times are UTC [ DST ]




Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Building a new rig
PostPosted: 01 May 2009, 03:33 
Offline

Joined: 27 Aug 2008, 23:30
Posts: 20
Ok, so I'm about to buy a brand new setup to change the actual. I already have the screens, TH and I keep the same case. I just change the internal components. I change because I need better performances, I have 2 burned USB ports and my sister needs a new rig too and I'll give her my actual.

What I do with it :
- Gaming (FSX, GTA4, CoD, ... )
- HD video editing (so lot of video conversion)
- Professionnal drawing (Autocad) but that's not demanding a lot ...

My actual setup :
- Asus Crosshair
- AMD Athlon64 X2 5200+ 2.66ghz
- Kingston DDR2 2gb 800mhz kit
- 2x 8800GTX in SLi
- OCZ 700W

I want to change for all new generations like DDR3, PCIe 2.0, etc...

What I had in mind:
- Asus Rampage II
- Intel Core i7 920 2.60ghz
- Corsair DDR3 6gb 1333mhz kit
- Nvidia GTX295 (possibility of 2 more later)
- Antec 1000W


At this time, nothing is bought, so I'm open to any suggestion.

And do you guys think I'd better get 3x GTX260 in SLi instead of GTX295 ? I mean, powerful single card versus moderate triple cards ...


Top
 Profile  
 


 Post subject: Building a new rig
PostPosted: 01 May 2009, 05:26 
Offline
Insiders
Insiders
User avatar

Joined: 29 Jul 2007, 05:24
Posts: 1512
Location: NZ
the GTX295 is already an SLI card (internal) so you'd only be able to add one latter. I would personally go for 2 gtx285's (if you can afford it). Other wise the 295 will be fine.

_________________
Dipping bags at Mach1.9


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 02 May 2009, 01:13 
Offline

Joined: 27 Aug 2008, 23:30
Posts: 20
the GTX295 is already an SLI card (internal) so you'd only be able to add one latter. I would personally go for 2 gtx285's (if you can afford it). Other wise the 295 will be fine.


Damn ! I didn't realized that ! So does that mean it won't be as powerful as it should in unoptimized sli games like FSX ? So I should go with 2x GTX285 with possibility of adding a third one instead of 1x GTX295 and possibility to add a second one.

PS: I can afford but I don't spend money uselessely !


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 02 May 2009, 01:39 
Offline
Insiders
Insiders
User avatar

Joined: 29 Jul 2007, 05:24
Posts: 1512
Location: NZ
I would go 2x285 then (maybe) latter go 3rd, my 5 cents :)

_________________
Dipping bags at Mach1.9


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 07 May 2009, 00:08 
Offline

Joined: 27 Aug 2008, 23:30
Posts: 20
Finally, after reading many many many reviews and comparisons, and learning about SLi and 3-way SLi, I ordered it today.

I gave the OK to my computer seller guy for those specs:

- Gigabyte EX58-UD4P
- Intel Core i7 920
- Kingston DDR3 6gb 1333mhz
- 2x Gigabyte GTX285
- Antec Skeleton
- Antec Quattro 1000W


Everything was in stock at his providers so I should be good to have them on friday :D I'm so excited :D


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 07 May 2009, 00:15 
Offline
Insiders
Insiders
User avatar

Joined: 29 Jul 2007, 05:24
Posts: 1512
Location: NZ
cool rig, just remember with the Antec Skeleton there in no room for a big CPU heatsink so don't splash out on one of those until you have done some measuring!

_________________
Dipping bags at Mach1.9


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 07 May 2009, 00:44 
Offline

Joined: 27 Aug 2008, 23:30
Posts: 20
cool rig, just remember with the Antec Skeleton there in no room for a big CPU heatsink so don't splash out on one of those until you have done some measuring!


I read some reviews about that lack but I'm not planning to OC it right now.

But, do the heatsink made for socket 775 fits the socket 1366 ?


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 07 May 2009, 00:57 
Offline
Insiders
Insiders
User avatar

Joined: 29 Jul 2007, 05:24
Posts: 1512
Location: NZ
Nope totally dif the 1366 is MUCH bigger, wider holes etc. A lot of coolers come with both now, or you can buy (or even get a free) bracket to fit the new socket with some older coolers.
if u ain't overclocking stock and the skeleton will be good

_________________
Dipping bags at Mach1.9


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 07 May 2009, 06:47 
Offline

Joined: 28 Mar 2009, 18:25
Posts: 55
I still think the Antec 1200 is the best case...


Top
 Profile  
 
 Post subject: Building a new rig
PostPosted: 08 May 2009, 00:07 
Offline

Joined: 27 Aug 2008, 23:30
Posts: 20
I still think the Antec 1200 is the best case...


Yeah, I looked at it but, it is not compatible with the 3-way SLi ! For 3-way Sli, you need 8 expansion slots while this case has 7. Only the Skeleton and the Nine Hundred Two has 8 slots !


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  




Powered by phpBB® Forum Software © phpBB Group