Widescreen Gaming Forum

Another very happy TripleHeader here...

Win7 x64, GTX285, 195.62
182.50 settings + 59.400 Hz: 5040 desktop but 'test failed'
182.50 settings + 59.350 Hz: success !

Big thanks elior77 :twothumb and cheers to everyone who struggled with this issue at some point. Looks like we're finally in the clear !

Another happy customer here. Win7x64, TH2go, GTX295 and 3 Dell 2209WA's

182.50 worked for me but without aero, this works with 195.81 and Aero :D

Thanks elior77

Fred

This process worked for me. Now running a stable 5040x1050.

Windows 7 Ultimate x64
TripleHead2Go
2x GTX285 2Gb in SLI
3x Samsung 2433BWs
Nvidia 195.62
PowerDesk 2.06.00
Aero works fine
PowerDesk works fine

My magic Hz number was 57.500; which means I had to drop the upper Hz value to 58.

:cheers

Great news guyz ! :cheers

Did you try 59.xxxHz? you need the latest table for that.

Great news guyz ! :cheers

Did you try 59.xxxHz? you need the latest table for that.

Excuse my ignorance but whats the 'latest table'? :?:

Works here now too. Thank you very much for this. I've gotten a nice fps boost over the old 182.50's I was just running. W7 Pro should be here Saturday. Will install and set this all up again. Just wanted to prove to myself that it would work with my specs.

Vista64/SP1
Powerdesk 2.06
Latest firmware
Dell 3x2209wa's
evga 295gtx--195.62

Dude, I went back to a single display because I had no hope.

I read your instructions with extreme skeptism, but...

I followed your instructions and am on the LATEST nvidia drivers (WITH AERO AND DX 10!) on Win 7 64 bit running at 5040 x 1050.

I am probably not allowed to swear in here, but

I F#*KING LOVE YOU MAN.

I was this close going the expensive eyefinity route (having to buy a display port adapter and new cards) or paying for a 30 inch monitor because I missed my 3 screen set up so much.

WILL YOU MARRY ME?!?!

[quote]Great news guyz ! :cheers

Did you try 59.xxxHz? you need the latest table for that.

Excuse my ignorance but whats the 'latest table'? :?:

The matrox firmware consist of the firmware and the video table, both need to be up to date in order to get 5040 @ 59.xxxHz

Ok thanks. Mine has just arrived this minute so fingers crossed, no problems. :rockout

I need your help guys. Have installed latest Powerdesk and firmware. rebooted. start powerdesk and multi display setup / GXM / start GXM setup wizard / select triple head / auto select best mode (1680x1050) / on all my samsung syncmaster monitors it shows as analog on analog connector /

It runs thru the wizard and windows error has occured at APPLYING MODE. Any ideas chaps?


I cannot get past this WINDOWS ERROR at the APPLYING MODE phase. Can I just confirm that you must get this part working before you adjust any settings in the nvidia control panel?




ASUS SKT-1366 P6T Deluxe V2
Win 7 64 bit
i7 975 Extreme OC to 4.2GHZ
6gb of 1866mhz Dominator DDR3
1TB Samsung F1 SATA II
Nvidia GeForce GTX 295 1792MB