Widescreen Gaming Forum

We release product of MP102-DVI with the edge-blending . Edge blending is a pure hardware design, without any delay. Users can play 1080P videos, play 3D games, does not affect any performance of graphics cards. We provide 0-511 overlap setting, user can adjust the gamma, p and alpha parameters. Using our products can link to two projectors resolution from 1024x768 60HZ to 2048x1200 60HZ, also supported part of the 3D projection, such as a resolution of 1024x768 120HZ, or 1280x800 120HZ.Part of the resolution need to customize.

input interface : one dual link DVI interface .maximum pixel clock 330Mhz
output interface: two DVI-I(can DVI and VGA simultaneously),maximum pixel clock 165Mhz
accessories:one 1.5m Duallink DVI cable,one 5V/2A power supply(100-240V) AC ,one RS-232 cable
dimension:165mmx130mmx28mm
warranty:2 year limited warranty
Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Hello all,
the support resolution
Project resolution refresh(HZ) Overlap width
800x600 60/75 0-512

1024x768 60/75/120 0-512
1280x1024 60/75 0-512
1280x720 50/60 0-512
1280x800 60/75/120 0-512
1366x768 60 0-512
1400x1050 60/75 0-512
1600x1200 60 0-512
1920x1080 50/60 0-512
1920x1200 60 0-512
2048x1080 50/60 0-512
2048x1200 50/60 0-512

Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Hello all,
I place a video at http://v.ku6.com/show/yqByX01YbWFWKcLD.html
1. two Optoma 1080p projector
2. edge blending width 360 pixels
3.computer output resolution 3480x1080P


Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Hello All,
user can buy at Dhgate

http://www.dhgate.com/p_ff808081289b2c6f01289f4361144158.html#0













if you need datasheet,please contact me

Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Great looking product, its just waaaay to expensive!

Hello All,
we set up edge blending system with two projectors(Benq 670). I place some picture for testing by our company.
the overlap is 256 pixel.



pure black with black level compensation










Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

I post some video at http://v.ku6.com/show/wSmElYAISRMsnsJZ.html
user can download datasheet for our device (MP102/MP103) hardware edge blending unit at http://www.mviewtech.com/en/faq.asp?video2

Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Nice stuff, just way too expensive.

If you can come on here and give a little bit of justification on the price I might be willing to look in to this. Why so expensive?

Fully integrated hardware edge blending options on the market are never inexpensive. If you don't need hardware edge blending there are options out there to use their MV103 box and software edge blending and pre-warping at lesser cost. I'll be experimenting with their MV103 box in a few weeks time with a third party software pre-warping utility. The main difference is, hardware vs software implementation of pre-warp and edge blend technology.

Everything being equal, I'd prefer hardware edge blending because it does not require software running on a computer to enable it once it's calibrated.

_________________
Brad Hawthorne
Product Manager
Nthusim Pty. Ltd. | www.nthusim.com