Widescreen Gaming Forum

Here's what I get :

XP : 5040x1050@60 Hz ok, 1680x1050 = black screen.
Vista : 5040x1050@60Hz unavailable, 1680x1050 ok.
:shock: :?:

I use nvidia driver 191.07 and MVV.inf in both OSes. In Vista I ran the utility, selected Enable Wide-Mode Timings and rebooted multiple times and still can't get 5040@60. What more should I do ? :?

Hi, sorry for reply late. I test the same driver on our lab and some other customers can also get 5040x1050@60 in Vista. Can you try the following:
(1) In vista, please use the display property advanced mode and unselect the "hide mode not supported by monitor" for the display setting.
(2) after Enable Wide-Mode Timings and rebooted can you see 4320x900 mode on the display property?

If there is still problem, please sent mail to [email protected] and I will ask engineer to test and find the solution for you.

_________________
Shanghai Mviewtech Co.,Ltd.

1) Done.
2) No, there are no other wide modes to choose from.
So it seems like the wide modes are not added. Multiple reboots, cold boots and freshly reisntalled nvidia driver didn't help.

E-mail sent...

1) Done.
2) No, there are no other wide modes to choose from.
So it seems like the wide modes are not added. Multiple reboots, cold boots and freshly reisntalled nvidia driver didn't help.

E-mail sent...

Hi,
1.do you read the readme.txt file in CD? install our software must run as administrator .
2.can you step by the following .
a. uninstall Nvidia driver,reboot.
b. install 191.07 driver ,reboot.
c. install our software as administrator,reboot.
d. run our software as administror,enable wide screen mode and reboot.
f do you see the 5040x1050 ,4320x900,4200x1050 or 4098x768?
Best Regards!
Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

1.Yes, I read it. And the pdf file. My only user account has administrator rights.
2.Did it, for the third time now. Nothing changes upon reboot, I see none of these resolutions.

What could possibly block the process ? :?

What could possibly block the process ? :?

Were you able to run games at 5040x1050 with your setup, the 191.07 drivers and matrox triplehead2go ? Have you tested it before trying the mview ?

1.Yes, I read it. And the pdf file. My only user account has administrator rights.
2.Did it, for the third time now. Nothing changes upon reboot, I see none of these resolutions.

What could possibly block the process ? :?

Hi scavvenjahh,
1.our software must write some information to windows, it seem vista block our software to do this .
2.could you install and run our software with mouse right button and select "run as an administrator" option.
3.please give me vista version(vista64 basic , business.....),.I will set up your environment and test it.

Best Regards!

Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Okay, so I did exactly what you wrote. No luck.
I can add modes like 2400x600 no problem, but the New Wide Modes never ever show up.

I'm running Vista Ultimate 64-bit SP2.

Okay, so I did exactly what you wrote. No luck.
I can add modes like 2400x600 no problem, but the New Wide Modes never ever show up.

I'm running Vista Ultimate 64-bit SP2.

Hi scavvenjahh,
our engineer test in vista64 Ultimate 64-bit SP2 that is no problem.perhaps install issue.you can see the link.
http://mviewtech.spaces.live.com/blog/cns!D67AB635CD5D1036!149.entry


5040x1050 60hz vista64 ultimate sp2 install step
Mviewtech's MV103-HDVE PRO install at vista as following steps.
1.install MviewCustomertool_pro_en.exe ,use mouse right button select Run as adminstrator.


2.run MView config tools ,use mouse right button select Run as adminstrator



3.select enable wide screen mode ,and click update mode ,restart computor.

4.install MVV.inf. open device manager -->select monitors>genenic PnP monitor.


5.select update driver software




6.select have disk ,and click MVV.inf(this file in the CDROM) file.





7.after install MVV.inf ,restart your computer.




Best Regards!

Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.

Yes, I received your e-mail. Thanks, I'll give it a shot tomorrow.
(The only difference with what I did : install MVV.inf after the update. I always start by installing the driver, as I do with TripleHead. This might very well be my mistake) :oops:

Yes, I received your e-mail. Thanks, I'll give it a shot tomorrow.
(The only difference with what I did : install MVV.inf after the update. I always start by installing the driver, as I do with TripleHead. This might very well be my mistake) :oops:

Hi scavvenjahh,
Even if your account with administrator privileges, you must follow the above method to install.

Best Regards!

Mviewtech

_________________
Shanghai Mviewtech Co.,Ltd.